Description
Digital Angle Finder and Protractor with Magnetic Base and Bevel Gauge Readout
-
Reads the angle instantly: this angle measuring tool shows the result on a clear digital screen
-
Stays put on metal without holding it: the magnetic base grips steel surfaces for a steady, hands-free reading
-
Marks straight lines before you cut: the laser guide line helps line up marking and cutting in one pass
-
Doubles as a digital protractor: switch between angle gauge and bevel gauge readings for different layout tasks
-
Small enough for any toolbox: the compact frame fits in a pocket, toolbox or workbench drawer
Eyeballing an angle before a cut is a fast way to end up a few degrees off, and a mismatched joint or crooked shelf usually isn't obvious until it's already cut. This digital angle finder with a magnetic base and laser guide solves that in one step: the magnetic base locks onto a metal surface, the laser line marks exactly where to cut, and the digital screen reads the angle to within 0.2 degrees so there's no second-guessing the number.
Whether you reach for it as an angle finder tool for framing or a digital angle gauge for cabinet work, the accuracy stays the same. It works equally well as a protractor tool for marking layouts or a digital inclinometer for checking how far a surface tilts off level.
Why choose Worfa
Digital Magnetic Angle Finder
| Feature |
Worfa |
Others |
| Magnetic base grips metal hands-free |
✓ |
✕ |
| Laser line marks cuts before you cut |
✓ |
No guide line |
| Reads to within 0.2 degrees |
✓ |
Less precise |
| USB-C rechargeable lithium battery |
✓ |
Coin battery |
| Compact enough for a pocket |
✓ |
✕ |
| 30-day easy returns |
✓ |
Varies |
Why You'll Love It
-
Laser Line Guidance: supports straight marking for layout and cutting
-
Magnetic Base Hold: stays attached to metal tools and surfaces
-
Digital Screen Readout: shows the angle value for a quick check
-
Compact Tool Size: easy to carry for jobsite or home projects
-
Project Ready Use: suits woodworking, construction and renovation tasks
Specifications
-
Frame Material: Aluminum alloy
-
Type: Digital angle gauge with laser
-
Magnetic Base: Square magnet
-
Accuracy: ±0.2 degrees
-
Battery: 3.7V lithium battery
-
Charging Interface: USB-C, DC5V 400mA
-
Dimensions: 2.4 x 2.4 x 1.3 in / 0.20 x 0.20 x 0.11 ft (62 x 60 x 33 mm / 6.2 x 6.0 x 3.3 cm / 0.062 x 0.060 x 0.033 m)
Package Includes:
Right for you if
-
✓You need a precise angle before you cut — it reads to within 0.2 degrees
-
✓You're working on a metal frame or rail — the magnetic base holds it steady hands-free
-
✓You want the cut line marked, not just measured — a laser line shows exactly where to cut
-
✓You carry your tools from job to job — it charges by USB-C and fits in a pocket
If two or more of these sound like you, this is the one.
FAQs
Q: How accurate is the reading?
A: It reads to within ±0.2 degrees, using a magnetic base to hold it steady while you check.
Q: Does it work on wood as well as metal?
A: The magnetic base is for metal surfaces; on wood, hold or clamp it in place for the same reading.
Q: How do I charge it?
A: It charges over USB-C from a 3.7V lithium battery, using a DC5V 400mA input.
Q: What's included in the box?
A: The digital angle finder itself, ready to charge and use.
Q: How big is it?
A: About 2.4 x 2.4 x 1.3 in (62 x 60 x 33 mm), small enough for a toolbox or a pocket.
